Introduction of System
This system is a set of automatic sealing system for double
glazing/triple glazing insulating glass.
The system can be sealed for different size of the hollow glass
processing. The system is shown in the figure below:
1) Friendly man-machine interface is concise users will be more
convenient to operate.
Touch screen (the language can be designed as customer’s demands)
2) This system has the thickness detection device and depth
detection device by the high resolution sensors. Combined with
automatically sealing function and adjusting the volume of the
glue, it can greatly improve the efficiency of production. The
sealant supply system is from Taiwan AIRTAC.
3) The special mixer is equipped, and making the black sealant and
white sealant mix well.
4) The system has two sets of sealing system (optional), to change
glue easily during production.
5) This system can be used in triple glazing glass. Firstly, it
glues for the first space, when it finishes, the rubber head will
adjust the angle for gluing the second space.
6) The V belt can adjust automatically according to the thickness
of glass. Accurate synchronous belt transmission system to ensure
the glass to move stably and clearly.
7). Rubber head pressure device can adjust glue head moving
cylinder pressure through the precision of electric proportional
valve to make the glue head attach the glass more smoothly. The
structure of centering rubber head can adjust the rubber head
according to the thickness of glass to ensure the effect of the
gluing. The sealing of all edges and corners enriches no air
bubbles, fully coating, without manual trimming.
8).The system has the “connection” system. The “connection” means
that it can combine the production line with the sealing system to
improve the production efficiency.
9).The cleaning function: When it is used for a long time or not
used, the worker must clean the rubber tube (blunt glue) to avoid
solidifying the rubber tube. When the worker adopts the cleaning
function, the glue in the rubber tube will be discharged to avoid
solidifying and protect rubber tube.
10). All components are high standard to be sure that the machine
can be used stable for a long time.
11).The edge of glass is full without airline, and the corner is
enriched without repairing it.
12) The third section stores the glass.
